CORROSION PROTECTION

CorrosionX® is known as Best Available Technology (B.A.T.) on the world market, thanks to its Polar Bonding Technology.

It is friendly to the environment, the human and the machine. It does not contain silicon and hardly any solvent.

Corrosion Inhibitor: Perfect for treating export goods and sea cargo, long term storage application or treating internal parts of machinery, vehicles and industrial gears for a period up to 3 years and more.

Lubricant: Great lubricant in corrosive environments and where heavy loads are found, it performs better than most specialized lubricants on applications such as bearings, chains, rails and hinges.

Penetrant: Rusty bolts can be loosened in a few minutes, which eliminates the need to burn them off.

Wet Protector: Water and moisture can not contact the metal. Leak currents are no longer a problem.

Cleaner for Metal: Penetrates through oxides e.g. at electrical contacts, removes it and prevents new formation of oxides. For more information please see our manual under www.scandex.de

CorrosionX Heavy Duty® provides ultra long-term protection against corrosion. Unlike CorrosionX's Fluid Thin Film (FTFC) technology, Heavy Duty provides a thick film coating that is even more resistant to moisture and the long-term effects of exposure to the elements.

Applications: Long-term storage of vehicles, machinery and other equipment in military depots. Provides extreme duty protection to forklift chains, machinery inside salt and fertilizer plants, cranes, offshore installations, petroleum production equipment, power plants and drawbridges. The average lifespan of exposed steel cables can be extended by a factor 2.5 times or more.

CorrosionX Aviation® is specially formulated for the Aviation industry, and its use is strongly recommended by the leading airframe manufacturers, like Boeing. The US Army found that a corrosion prevention and control program utilizing CorrosionX Aviation would save $70,000,000 US annually in aircraft refurbishment costs. Please see the report "Environmental Protection on Army Aircraft" under www.scandex.de

CorrosionX High Voltage® is a specialised formulation of CorrosionX for electrical systems up to 50,000 Volt! It protects switch boards, telephone terminals, battery terminals, distributor systems, circuit breakers and maritime electronics against condensation, moisture and splashed water (Norm IP 54 and IP 64 for short term protection). Even saltwater damaged equipment can normally be repaired. A non-flammable C0² propellant is used in CorrosionX High Voltage Aerosols.

CorrosionX for Guns® contains the same space-age technology, the Polar Bonding, as CorrosionX. The only product you need for complete gun care. As a lubricant, it lasts longer and is more effective than Teflon-fortified (PTFE) products. It cleans better than cleaners and solvents. In addition, the FTFC coating significantly reduces fouling and protects firearms from rust even in the rain.
Application: Its potent, high performance lubrication makes it ideal for automatic and semiautomatic weapons. No other protectant comes close for long-term weapon storage or for extreme duty applications such as those encountered by military Special Forces and waterfowl hunters.

CorrosionX Engine Oil® Is our special oil for all diesel and petrol engines with a utilization lower than 10,000 km or 200 h a year. It can certainly be used in high utilized engines, but this does not offer economical advantages.

Using CorrosionX Engine Oil, the oil film does not crack, even if the engine has not been used for a period of more than 2 years, thus preventing corrosion and engine damage. CorrosionX Engine Oil is available in all common viscosities. Perfect for seasonal used equipment like ships, antique cars, motor homes, generators, agriculture and construction machinery as well as military vehicles and equipment.

CorrosionX Low Friction Lub® is an ultra-high performance lubricant, with a coefficient of friction as low as 0.01. It also has outstanding anti-rust and corrosion properties. It can be used in temperatures up to 150°C. Perfect for heavy duty use on fast rotating bearings and chains with loads up to 40.000 PSI in industrial and commercial applications.

CorrosionX Hydraulic Oil® is a high performance multi-grade hydraulic oil with best available anti corrosion properties and great abilities preventing gum inside the hydraulic circuit. Supersedes norm HVLP DIN 51524-3.

X² SUPERCOATING

Multiply the performance of the best-performing anticorosion product with itself and you will get a new product: X². It works like CorrosionX but the film will dry last even longer. The X² Series is a good replacement for Chromate 6 Products!

Applications: First anti-corrosion treatment in the manufacturing process (OEM Sector) of virtually any machine or vehicle as well as on used machinery with nearly clean surfaces.

X² Supercoating Paint Protector

For use on: Bridges, Masts, Piles, Static Aircraft

Good adhesion, Good UV protection, protection, low VOC's, 0 HAPS, Water Based, Clear, Glossy, Minimal surface preparation (must be clean and oil free) Long lasting, dry Film.

X² Supercoating Alu Protect Version

For use on: Internal Protection for Aluminum or Magnesium based Aircrafts, Vehicles or Machines.

Excellent adhesion to aluminum, expensive Product, No UV Protection, Minimal surface preparation, High VOC, Solvent Based, No Silicon, No Cr6 Flexible, long lasting, dry Film.

X² Supercoating All Metal Protect

For use on: Primer for any metal applications.

Solvent based, black, good adhesion, Excellent corrosion protection, can use over existing corrosion, High VOC.

X² SuperWAX

For use on: Protector for metal in virtually all applications.

Yellow to brown, Good adhesion, Excellent corrosion protection, can use over existing corrosion, Low VOC, 0 HAPS.