|
The NoiseKiller Clutch Claw has
achieved wide acclaim from the motoring press,
and has been chosen by Scottish Office and City
Mex to protect their LCV commercial fleets.
In attack tests carried out by FAST CAR Magazine
using a professional car thief, the Clutch Claw
resisted attack for 30mins and 58secs - almost
twice as long as it's nearest Thatcham approved
rival.
Most mechanical security devices
rely on restricting the steering wheel from being
turned and most are overcome in seconds by attacking
the wheel not the device.
The Clutch Claw locks the clutch
and the brake pedals together, thus stopping the
vehicle from being driven. The new "Mark
4" Clutch Claw uses a series of pegs located
under the top box, these are adjustable along
the length of the top box. Once the pegs are set
the device becomes "dedicated" to that
vehicle, locking the two pedals together and "jamming"
them against the bulkhead/floor of the vehicle.
The Clutch Claw does not require any additional
"bolt on" brackets.
The Clutch Claw will fit virtually
all LCV's (Ford Transits, Peugeot Boxers etc.)
4 x 4's and Cars that have at least 75mm of pedal
bar showing below the dash.
Noisekiller Clutch Claw
is the perfect security device for all
Land Rover models.
Once the Clutch Claw is set, it
can be located and locked in seconds, and is small
enough to be stored under the seat. The key is
not required to lock it.
The first generation C2 post was
launched exactly 2 years ago and, as with all
NOISE KILLER products, those 2 years have proved
to be invaluable. By listening to customers,
police, commercial users etc., and working hand
in hand with the research and development side
of the internationally famous lock manufacturers,
Lowe & Fletcher, a lock of exceptional strength
has been developed to secure the second-generation
C2 post.
The C2 Security post now offers a high level
of security and versatility, which is second
to none in a removable post of this type.
The main upright has a unique one-piece
construction making it less vulnerable to attack. The upright
section is 60mm square with a wall thickness
of 5mm and the installed height is 670mm above
the ground. On the front and sides of the post
is photo luminescent glass beaded tape for high
visibility at night. The post can be located
or removed from its base with the easy lift handle.
The main feature of the new lock is the one-piece
solid body, encased in a 5mm armoured steel sleeve, located at the top of the post. The lock is of
radial pin design with a drill resistant core
and complete with 2 keys.
With the re-designed pressure
reduced locking mechanism, locking the post is "child's
play".
The base plate (which is concreted into the ground)
has also undergone modification, the lid is non-flip;
the drainage holes ensure that water runs straight
through and a new lubrication hole in the lid
ensures trouble free use for many years. Extra
bases can also be purchased so that the C2 can
be used in more than one location.
The all new C2 post is the culmination of over
14 years experience in producing the ultimate
in mechanical security.
The fabrication division manufacturers
security boxes for flat bed commercial VEICOLI.
Our security boxes are fitted under
the flat bed of the vehicle and provide a safe
storage area for expensive tools. They allow tools
to be safely carried under the vehicle and help
to stop tools sliding about on the back of the
vehicle, which can be a safety hazard.
Fitted with security locks the boxes
are also fitted with a seal to give a watertight
fitting.
Manufactured from high quality steel
coated for added protection the boxes can last
as long as the vehicle itself.
Boxes can be custom designed and
manufactured to order. Easily fixed to the under
body the boxes cannot be removed easily once secured. |
