Company Reg: 4289829
Marine Soundproofing Products
Make your Leisure time Pleasure time
Noise Insulation in marine applications has long been recognised as vital to enhance the comfort of your craft and keep airborne sound and vibration from engines and generators to a minimum in cabins and saloons.
This is best achieved by using Marine Acoustic Composites made from layers of special sound reduction materials to isolate or absorb the various sound frequencies produced by the engines and metal vibrations of engine rooms.
Our Marine Range of products are available from stock in various thickness and can be purchased either in a non-adhesive form or with a self-adhesive backing. We, at Noise Killer, have the solution to your sound problem, however severe and our range is tailored to meet your budget.
Noise Killer Lead Sandwich
.JPG)
.jpg)
A sheet of high quality sound deadening lead sandwiched inside two layers of class "O" fire rated acoustic foam with a self-adhesive backing
The Lead layer acts as a barrier to sounds and the two layers of foam absorb the airborne sounds that have been blocked.
Noise Killer Vibrasorb
.JPG)
.JPG)
This is a 6mm open cell Non Flam acoustic foam laminated onto a 2 mm damping sheet with a foil facing and self-adhesive backing. The damping sheet will remove vibrations from the metal casing and the foam will absorb airborne sounds
Noise Killer 32 Glass Foil Faced (non stocked item)
The 2 mm damping sheet is sandwiched inside a layer of 6mm open cell Non Flam acoustic foam and a layer of 26 mm open cell Non Flam acoustic foam, which gives a higher absorption rate of the airborne engine sounds. Supplied with a Glass Foil facing for added strength on the surface.
Noise Killer Egg Box
Noise Killer Egg Box can be used in Marine applications to insulate and sound proof side panels of the craft. It has very high absorption values as well as offering very good heat insulation. Self adhesive it very easy to apply and trim to size no messy glues are needed.
Noise Killer Lead lined Acoustic Blankets
The Lead Lined Accoustic Blankets can be made to specific sizes and will form around the engine and reduce the noise from the engine.
Total Pages: 1 Displaying Page: 1 Goto to Page: 1