Soundproofing
technology of the highest level has been
used in the research development and design of
our exclusive noise reduction materials.
Noisekiller acoustic materials are
used in our Car sound proofing, 4 x 4 sound proofing,
Motor Home sound proofing kits. They can also
be bought in sheet form if required. All sheets
are 2 x 1.2 metres in size for use in Marine and
Boat sound proofing, Domestic sound proofing and
for Industrial sound proofing projects.
A class "O" fire rated
acoustic foam with a foil facing that has a vibration
controlling damping sheet with a self-adhesive
backing. Waterproof, oil resistant and fire proof
it can be used in all types of engine bays.
The damping sheet helps to reduce
the noise created by the vibrations of the bonnet
lid, boat engine cover or generator housing. The
open cell acoustic foam layer absorbs the airborne
sounds created by an engine.
The foil facing gives a wipe clean
surface and helps to stop the acoustic foam from
clogging with fumes and oils, and helps to stop
discolouring of a bonnet lid.
A class "O" fire rated
acoustic foam sandwiched inside two rigid damping
sheets for maximum noise absorption.
The damping sheets help to block
the road noise, exhaust noise, and the vibrations
created by vehicle movement, and the acoustic
foam will absorb the frequencies that pass through
the damping sheet.
Used on the floor surface inside
a vehicle and along the side of a transmission
tunnel usually under the existing carpets.
A class "O" fire rated
acoustic foam sandwiched inside two self-adhesive
rigid damping sheets for maximum noise reduction.
The damping sheets help to block
the road noise, exhaust noise, and the vibrations
created by vehicle movement, and the acoustic
foam will absorb the frequencies that pass through
the damping sheet.
Used mainly inside Land Rovers for
the areas that are not flat on the floor and for
the bulkheads in middle and rear engine vehicles.
A heavy duty mouldable polymer damping
sheet with a self-adhesive backing and foil facing.
The Barrier mat is easy to shape
and acts as a blocker of sound or it can be used
to reduce the vibrations of a metal structure.
Barrier mat is used around bulkheads,
wheel arches, doors, under spare wheels and on
the rear wings of vehicles.
Used extensively in ICE market to
enhance the bass sound quality of rear sound systems
and block out noise and vibrations from exhausts.
Barrier mat can also be used on
party walls for domestic sound proofing
A sheet of high quality sound deadening
lead sandwiched inside two layers of class "O"
fire rated acoustic foam with a self-adhesive
backing
The Lead layer acts as a barrier
to sounds and the two layers of foam absorb the
airborne sounds that have been blocked.
Can be used on the bulkhead in Land
Rover models or inside in-cab engine covers, for
lining generator housings in Motor Homes, to cover
surveillance equipment housings in commercial
vehicles, and as part of a solution to industrial
noise reduction.
A class "O" fire rated
sound absorbing acoustic foam with a profiled
face
The profiled face gives a greater
surface area with which the sound can be absorbed
than flat faced foams. Used
in domestic sound proofing for party walls, in
music studio sound proofing, in acoustic hoods,
in the rear of motor homes, commercial vans and
boats for both sound and heat insulation.
MORE
MATERIALS > |
