|
Noise Insulation in marine
applications has long been recognised as
vital to enhance the comfort of your craft
and keep airborne sound and vibration from
engines and generators to a minimum in cabins
and saloons.
This is best achieved by using
Marine Acoustic Composites made from layers
of special sound reduction materials to
isolate or absorb the various sound frequencies
produced by the engines and metal vibrations
of engine rooms.
Our Marine Range of products
are available from stock in various thickness
and can be purchased either in a non-adhesive
form or with a self-adhesive backing. We,
at Noisekiller, have the solution to your
sound problem, however severe and our range
is tailored to meet your budget.
This is a 6mm open cell Non
Flam acoustic foam laminated onto a 2 mm
damping sheet with a foil facing and self-adhesive
backing. The damping sheet will remove vibrations
from the metal casing and the foam will
absorb airborne sounds
This is a 2mm damping sheet
sandwiched inside 2 layers of 6mm open cell
Non Flam acoustic foam with a Glass Foil
facing for extra strength. The layer of
foam nearest to the engine bay sides acts
as an isolation layer and along with the
damping sheet reduces vibrations. The top
layer absorbs the engine airborne sounds
and dissipates the noise through the cells.
This is similar in construction
to the Noisekiller 12 Glass Foil faced with
the addition of a sheet of Lead to act as
a block instead of a damping sheet.
The 2 mm damping sheet
is sandwiched inside a layer of 6mm open
cell Non Flam acoustic foam and a layer
of 26 mm open cell Non Flam acoustic foam,
which gives a higher absorption rate of
the airborne engine sounds. Supplied with
a Glass Foil facing for added strength on
the surface.
The Lead
Lined Accoustic Blankets can
be made to specific sizes and will form
around the engine and reduce the noise from
the engine.
Noisekiller
Egg Box can be used in Marine
applications to insulate and sound proof
side panels of the craft. It has very high
absorption values as well as offering very
good heat insulation. Self adhesive it very
easy to apply and trim to size no messy
glues are needed.
PROJECTS >
|
