SOUNDPROOFING MOTORHOMES

Hymer/A class

On Hymer and A Class models it is possible to use Noisekiller materials to soundproof areas that create excessive noise.

NoiseKiller Non Adhesive Acoustic Floor Mats can be used on the floor areas and also under the carpeted area in front of the steering wheel.

NoiseKiller Barrier Mat can be used on the interior bulkhead and interior wheel arches.

A NoiseKiller Lead Lined Accoustic Blanket is also used on the engine to reduce engine noise.

Self Build Motor Homes

If you are converting your van into a motor home then further materials can be used in the rear section.

NoiseKiller Liquid can be used on the side panels and roof to reduce drumming and rain noises from these areas.

NoiseKiller Barrier Mat can be used on the lower side panels and rear wheel arches to reduce drumming and road noise.

NoiseKiller Egg Box can be used on the roof and side panels to reduce air borne sounds in the rear section and also to give heat insulation in that area.

Type 2 and Split Screen VW Models

Materials are available to cover all areas of the inner cab. Ring for further details.

Dodge

Noisekiller can also design and fit kits for one off applications. The Dodge in the pictures on the right was being converted for use as a mobile home.

NoiseKiller Foil Faced was used on the bonnet to absorb engine noise.

NoiseKiller Adhesive mats were used on the rear bulkhead to reduce the noise coming from this area.

NoiseKiller Non Adhesive mats were cut and placed under the rubber floor covering.

NoiseKiller Barrier Mat was used on the front wheel arches and on the inside of the engine cover.

< BACK